Skip to content
blzr docs

Build: VODER Master

Output stage for the VODER. A master gain node controlled by MIDI CC7 (Volume) feeds a dynamics compressor configured as a safety limiter. The compressor prevents clipping when multiple filter bands peak simultaneously.

Step 1: Add spectral tilt filter

Section titled “Step 1: Add spectral tilt filter”

A lowshelf filter at 3 kHz controlled by CC74 (Brightness) applies 0–24 dB of spectral tilt. A mul node scales the normalized CC value (0–1) to dB (0 to −24).

Nodes added: vm-tilt, vm-cc-tilt, vm-tilt-mul

Connections: 2 new

Step 2: Add master volume

Section titled “Step 2: Add master volume”

A gain node controlled by MIDI CC7 (Volume) provides master level control.

Nodes added: vm-vol, vm-cc

Connections: 2 new

Step 3: Add safety compressor

Section titled “Step 3: Add safety compressor”

A compressor at -12 dB threshold with 4:1 ratio prevents clipping from simultaneous band peaks.

Nodes added: vm-comp

Connections: 1 new

Step 4: Group into a module

Section titled “Step 4: Group into a module”

Select all six nodes and press g. Expose the tilt input and compressor output as ports.

What you just built

Section titled “What you just built”

A reusable VODER Master module with 1 exposed parameter and 2 exposed ports.

Select it in the Module Library (SPC m) to add one to any patch.

Next steps

Section titled “Next steps”